Cisco(Tandberg) Telepresence Endpoints does not support manual resolution and frame rate setup.
just you can set calling speed. in this cause, this post will be help for you who want change to high resolution.
in the Video Configuration(System Configuration > Video > Input > Source > Optimal Definition),
you can select 3 profiles. High, Medium and Normal is that. as following table,
for Example, High profile is require low bandwidth. but, High profile does not show High quality video.
it just mean high bandwidth efficiency. so, it has high probability to take high resolution comparing other profiles.
System Configuration > Video > Input > Source > Optimal Definition
and there is one more thing.
Threshhold60fps options is limit the 60 frame rate.
default value is 1280x720. it's meaning that 60fps video will be first priority when upper HD resolution was taken.
If you has priority for video resolution than frame rate, you should select Never option.
Good luck!
No comments:
Post a Comment